Hydraulic Coolers, Pressure Line Filters, Air & Bio Gas Compressors / Vacuum Pumps / Blowers, Rotary Lobe Pumps

Parker Piston Pumps & Motors

page under construction

Parker Hydraulic piston pumps motors

 

Parker F1 Pump

Fixed Displacement Piston Pumps/Motors

F1 and F2 pumps and motors

The F1 pump comes in four bolt mounting ISO and SAE shaft configurations.  The displacement ranges through F1-12, 25, 41, 51, 61, 81, 101cm3 per revolution.

Features

  • High self priming speeds
  • Operating pressure up to 400bar(g)
  • High overall quality, efficiency and reliability

These features make the F1 a simple and inexpensive installation requiring minimal piping

Port adapters, suction fittings and accessories can be found on the Ancillaries & Components page

The F2 pump if a further developement of the twin flow version of the F1 with two independent flows.  This makes it possible to operate two work functions that are independent of each other which results in higher speed and increased operating precision.  The F2 is ISO four bolt mounting with a displacement range F2-42/42, 53/53, 55/28, 70/35, 70/70 cm3 per revolution.

Port adapters, suction fittings and accessories can be found on the Ancillaries & Components page

F1 motors are available in four bolt ISO shaft bulid, the displacement range being F1-25, 41, 51, 61, 81, 101, 121cm3 per revolution operating pressure up to 350bar(g).

Port adapters, suction fittings and accessories can be found on the Ancillaries & Components page

123 123 123
Parker Variable Displacement Piston Pump

Variable displacement piston pumps

The VP1 is a variable displacement piston pump for truck applications.  It is highly efficient and light.  There are flow unit sizes VP1-045, 075, 095, 130 having the same shaft and mounting flange ISO standard 7653-1985.  It cab be close coupled to a gearbox PTO or to an independent PTO (e.g. engine drive PTO).  The VP1 is suitable for all local sensing systems; cranes, refuse collection vehicles, sewage trucks, snow ploughs and salt/sand spreaders.

Port adapters, suction fittings and accessories can be found on the Ancillaries & Components page

123 123
Parker F11 Pump

Hydraulic Motor/Pumps

F11 and F12 are the series of reliable & efficient, bent axis, fixed displacement, heavy-duty motor/pumps.  They can be used in numerous applications in both open and closed loop circuits.

The F11 series is available in sizes 5, 6, 10, 12, 14 and 19cc in CETOP, ISO, SAW and SAE versions.  Maximum intermittent pressuer up to 420Bar(g)

Th F12 series is available in sizes 30, 40, 60, 80, 90, 110, 125, 150 and 250cc and ISO, CETOP< cartridge and SAE versions.  Maximum intermittent pressure up to 480bar(g) and continuous operating pressuer up tp 420bar(g)

Port adapters, suction fittings and accessories can be found on the Ancillaries & Components page